JP1 is located directly behind the DB9 connector. Note: Jumper JP1 inside the iPlayer 2 should be removed for proper operation. One simple way to achieve this wiring is to use two adapters from Radio Shack connected end to end: RS-231 Male DB9 to Male DB9 Gender Adapter and RS- 264B Female DB9 to Male DB9 Null Modem Adapter. Typically link 7 is used for interfacing to external equipment.īoth the HWI and the iPlayer 2 have female DB9 connectors, so you will need a male-male cross over cable. HardwareĪny RS-232 communication link on the HWI system can be used to interface to the RS-232 serial port on the iPlayer 2. This application note describes the hardware requirements and configuration parameters for the HWI system. Through this interface the HWI system can command the iPlayer 2 to switch between up to 225 different shows, as well as set the overall brightness level. The Color Kinetics iPlayer 2 can be easily interfaced to the Lutron HomeWorks Interactive® (HWI) system via an RS-232 serial connection. Controlling an iPlayer 2 from a Lutron Homeworks Interactive System
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |